Powder supply center

The main body of the powder supply center is made of 1.5mm and 2.0mm plastic-coated boards. Divided into the following parts.
1. Pneumatic fluidization and vibration composite powder supply barrel;
2. Automatic lifting powder suction pipe and powder pump;
3. Back-flushing fast powder tube cleaning device;
4. Fan and filter element cleaning device;
 
Features
1. Pneumatic fluidization and vibration composite powder supply barrel;
 
    Pour the powder to be used into this bucket (the powder returned by the recovery system is also injected into this bucket). At the bottom of the bucket, there is a vibrating plate, which can generate vibration according to the required frequency. The powder is fluidized.
2. Automatic lifting powder suction pipe;
 
    As the powder in the powder supply barrel is used, the powder level decreases, and the powder suction pipe and powder pump gradually decrease under the control of the powder level signal, so as to keep the powder supply uninterrupted. The powder suction pipe and the powder suction pump will automatically rise.
3. Back-flushing powder tube rapid cleaning device;
 
When the spraying work is over and new powder needs to be replaced, the powder accumulated in the powder suction pipe and the powder pump must be cleaned up. At this time, remove the powder supply barrel, the powder suction pipe and powder pump begin to descend, insert the head of the powder suction pipe into the back blowing hole seat, and use the back blowing compressed air to clean the original powder supply system, and ensure that the cleaning time is short. Thoroughly clean.
4. Fan and filter element cleaning system;
   When the powder supply barrel is working, due to the fluidization and the powder returned by the recovery system, more powder will float in the air, causing environmental pollution. This device will use the wind generated by the fan to attract the powder to the filter device. Ensure a clean operating environment